installing carpet pad::The carpet pad or underlay is available in a range of materials and stiffnesses installing carpet pad

installing carpet pad

installing carpet pad

installing carpet pad::The carpet pad or underlay is available in a range of materials and stiffnesses.
The carpet pad helps to distribute the pressure on the carpet and enhances its life.
Besides the enhanced life of the carpet, the carpet pad also helps in sound and thermal insulation and improves the feel of your carpet.
With longer carpet life and reduced utility bills a carpet pad pays for itself many times over during its lifetime.
Ensure that all the tools needed for the installation are at hand.
You would not want to run to the store in the middle of the installation because you forgot the pliers.
If there is an older carpet on the floor it should be removed and discarded.
Thoroughly clean the subfloor over which the carpet pad will need to be installed.
Remove all traces of dirt, grime, oil, old carpet staples, and water from the area.
Repair any damages in the floor and check it for integrity, loose boards or unwanted sounds.
The tack less strips should not be installed in the middle of doorways.
The tackless strips must be nailed at intervals of 8 to 12 inches.
If it is not possible to nail the strips down you may have to use a strong commercial adhesive to glue it instead of nailing it down.
Remember that the tackless strips are sharp and you must wear gloves when handling them to avoid the risk of accidental injury.
When installing the tackless strips it is vital to ensure that they meet at all the corners of the room.
Cut the carpet padding into strips long enough to run from one end of the room to another.
Install the carpet padding over the tackless strips ensuring that the waffle side of the carpet pad is facing upwards.
Place the carpet padding strips butting each other but make sure that there is no overlap.
Once the strips of carpet pad have been installed, cut away the carpet pad along the inside margin of the tackless strip.
Staple the carpet pad at intervals of 6 inches or glue it down to the subfloor.
Cover the seams of the carpet pad strips with duct tape.
Your carpet pad is ready and it is time to over it.
Ensure that your carpet installer has all the right tools like the power stretcher and the knee kicker with him.
Why should you know about carpet pads?
Carpet pad installation is usually done by professionals.
But knowing how the carpet pad should be installed will ensure that you will be better able to supervise the work of contracted installers.
Given the importance of the carpet pad and the substantial investment in your carpet that it will protect, it is vital that you have an idea about the and how they are laid.
Carpet pads are generally made of foam, rubber or fiber.
You must carefully consider the installation instruction and the warranty conditions of the carpet you buy.
Carpet warranty may be voided if you install it over the wrong carpet pad.
If you are replacing an old carpet you may also consider to reduce the environmental impact of your purchases.
Visit our showrooms for more information about.
Related topics: , , , ,
installing carpet pad::